Wednesday, May 26, 2010

Braised Oak Boat Ribs

The heat gun definitely works to lift the old paint, at least on the inside where it appears it was painted over varnish.  I cranked it up to 1100 degrees F, the highest setting, and the paint first starts to blister and then gets scorched bumps on it.  After that it will lift off in limp strips.  Under the paint, the old varnish turns into a goo, and it's pretty tough to scrape very much of that off.  So another sanding step will be needed to get down to bare wood.  I noticed that where it appeared that paint was applied to weathered wood, probably without any varnish on it, the paint was sticking a whole lot more.  It will be more work to get that paint off the oak ribs.

It was getting tougher to sit inside the boat and do this stripping, and This Olde Boater was getting pretty much "stoved up" after about an hour or so of being hunched over and peering at it with my spectacles.  So I finally wedged a few split logs under one side so I could stand on the ground and work at it from there.  Much better having your work surface situated so it's literally less of a pain to work on.  Must be why surgeons don't sit on top of you when they're doing repairs in the OR.  Which reminds me, I have the intention of getting a slightly narrower scalpel for scraping between the ribs - maybe a 3/4 inch.  AND I'm going to check out getting one of those back support belts you see Olympic weight lifters and Sams Club employees use to try to minimize the "stoving" effect.

All the while of course, Frank the Zen Dog has been faithful in his job of supervising the work site.  I think he must be on contract from OSHA.  You can tell he takes his job seriously.  See, he's watching carefully and is ready at a moment's notice to man (dog) the fire hose - or pee on the fire hydrant - or try to keep his new baby brother Ralph from becoming a roasted hot dog.

Speaking of roasted, another good thing to do if you're an Olde Boater is to fire up the sauna ahead of time, knowing you'll also need to roast your bones after the Olympic braising event.  The sauna is good too for reflecting on how life imitates art, and Art imitates Life, and Zen starts with a "Z" just like Zorro, and if you really were Zorro you'd be riding a horse instead of fixing up a boat for a 20 horse outboard, or how the inboards are connected to the outboards.
Plus, after a good steamy sauna - or a dry roast if you prefer - you'll be perfectly prepared for a nap, which is perhaps the highest and best objective in all of this.

So, fire up boaters...!

Monday, May 10, 2010

The Inside Job

The unexpected spring snow melted quickly this weekend, so it was back to the grind.  Next step, stripping the rock-hard white paint out of the inside.  I'd already blasted away the loose chips last fall with a power washer.  Now I'd try out the drill attachment Tool Guy suggested from Home Depot.

It was a synthetic wheel meant to be a high speed sander / stripper, and it DID work better than the chemical paint stripper.  But after quite awhile working on a relatively small area, I got back to wondering how long it would take to do the inside of this 18-foot boat.  SO... another trip to Home Depot to look at power tools and attachments.
I'd heard about stripping paint with a torch, and was quite a bit leary about applying flame to an old wood boat.  But in searching through the isles I ran across an electric heat stripper - adjustable temperatures from 200 to 1100 degrees F.  I also picked up some more drill attachments that looked like they had the potential for removing mass quantities of old paint in a hurry.
By the time I got back from Home Depot it was fairly late in the day.  The olde Volvo wouldn't start in the parking lot.  Luckily Tires Plus was right across the lot and open on a Sunday, and engine work is included in the "plus" part.  Even got a ride home with the two dogs and new tools, so I guess that was lucky.  So... next episode I'll try to discover the quick and dirty way to strip the inside of This Olde Boat.
Until then remember, life is a grind so get some tools!